Supermicro Layer 2 Ethernet Switches Keep IT Green

Supermicro extends its “We Keep IT Green®” initiative with a pair of powerful 52-port 1-Gigabit-per-second Energy-Efficient-Ethernet switches. The SSE-G2252 and its companion SSE-G2252P each provide 48 ports of 1-Gbps Ethernet connectivity with RJ45 connections as well as an additional four 1Gbps ports with SFP connectors. The SSE-G2252P model also offers support of IEEE-802.3at-compliant Power-over-Ethernet (PoE) devices with what is perhaps the most flexible power budget allocation in the industry. Up to 30 Watts can be supplied on any RJ45 port (subject to a maximum PoE budget of 400 Watts), thus making the SSE-G2252P capable of supporting the broadest range of commercial PoE devices . Both support the latest Energy Efficient Ethernet standard (IEEE 802.3az).

These Layer 2 switches offer extremely cost-effective networking in SMB or data center environments. They provide a choice of management interfaces using either a Web-based GUI or an industry compatible command-line-interface. The PoE model makes possible rapid installation of PoE-based wireless access points for conferences and shows, support for VoIP phones, as well as PoE surveillance cameras and a myriad of new PoE devices becoming available on the market.

The SSE-G2252 and SSE-G2252P also offer a full range of popular Ethernet features like Jumbo Frames, Link Aggregation, VLANs, and Quality of Service. All of this is done in a compact 1U form factor for maximum flexibility in rack-mount installation.

Layer 2 Ethernet Switch - SSE-G2252

Summary:

• 48 RJ45 10/100/1000 ports and
• 4 SFP 1G ports
• Non-blocking connectivity
• Standard Layer 2 Features:
• IPV4 and IPv6, QoS, 256VLANs
• Jumbo Frame Support up to 9KB
• RJ45 Console Port for CLI: Web Management GUI, CLI
• Energy Efficient Ethernet (802.3az)
• Power supply: 65W (83% efficiency)
• 1U form factor for flexible installation
• Dimensions (W x D x H): 440mm x 379mm x 43mm
• Weight: 6.8 lbs / 3.1 kg
 
Specifications - Features

Switching Features:
 - 16K MAC address entries
 - Auto negotiation on all ports
   * Flow Control supported
   * Provides IEEE 802.3x for full duplex mode
 - 10/100Mbps mode > back pressure flow control half duplex mode
 - Storm protection
   * Broadcast
   * Multicast
 - Spanning tree
   * IEEE 802.1D spanning tree
   * IEEE 802.1s multiple spanning tree (32 instance)
   * IEEE 802.1w rapid spanning tree
   * Spanning Tree fast forwarding
   * Loopback Detection
   * Auto edge port
   * BPDU filter/guard
   * Root Guard
 - VLANs support:
   * IEEE 802.1Q VLAN
   * Port-based VLAN
   * MAC-based VLAN
   * Protocol-based VLAN
      - 16 entries per system
   * IP-based VLAN
   * 4K VLANs
   * Support private VLAN Edge (Traffic Segmentation)
   * Voice VLAN
   * Guest VLAN
   * VLAN Trunking
   * GVRP
   * Supports Multicast VLAN Registration (MVR)*:
     - 5 MVR group
     - 256 MVR source group (shared with IPMC table)
 - Double tagging:
   * IEEE 802.1 Q-in-Q
   * IEEE 802.1ad provider bridge
   * Unqualified learning and forwarding
 - IGMP:
   * IGMP snooping v1/v2/v3
   * IGMP v1/v2 querier
   * IGMP immediate leave
   * IGMP filtering/throttling
   * IGMP snooping leave proxy
   * IGMP v1/v2/v3 proxy
 - Link Aggregation
   * IEEE 802.3ad with LACP
   * Manual trunking
   * Up to 12 aggregation groups are supported, and up to 8 ports per group
Security Features:
 - Port Security (MAC-binding)
   * Static port (MAC-based)
   * Dynamic port (MAC-based)
 - User/Password protected system management interface
   * SNMP
   * Web
   * Telnet
 - Access control list (512 rules)
   * L2/L3/L4
   * IP-MAC ACL
   * Time-based ACL
 - Extended IPv6 ACL
 - RADIUS (RFC2138)
 - TACACS+
 - HTTPS/SSL
 - SSH v1.5/v2.0
Quality of Service (QoS):
 - Provides 4 queues per port
 - Priority queue scheduling scheme
   * Strict priority
   * Deficit weighted round robin
 - IPv4/v6 DiffServ
   * L2/L3/L4 Traffic Classification / Priority Management
   * IEEE 802.1p (COS)
   * DSCP/TOS
   * TCP/UDP port number
   * IP SA/DA
   * MAC SA/DA
   * IPv6
 - Queuing
   * Port based CoS
   * IEEE 802.1p VLAN information based CoS
   * IP ToS/IP precedence based CoS
   * DSCP based CoS
   * TCP/UDP port base CoS
   * QoS marking
 - Packet prioritization based on ingress/egress ports'
    pre-defined value listed below
   * Trusted
   * IEEE 802.1p/Q tag
   * ToS field tag
   * IPv4 DSCP
   * Ethernet type field
   * TCP and/or UDP port numbers
   * SA and/or DA IP address
   * ToS Field Tag
 - Traffic shaping
   * IP based (all ports)
   * Port based (all ports)
   * Port based shaping QoS aware
 - Per port bandwidth management
   * Resolution 64KB
 - Ingress/Egress metering at 64KB increments
   * Ingress/egress policer
   * Ingress and egress co-work
 - CPU interface filtering
Management Features:
 - RJ45-type console interface
 - Management methods:
   * Web-based
   * Telnet (4 session)
   * SNMP
 - Software upgrade/download
 - Multiple configuration file upload / download by TFTP and HTTP
 - Dual image
 - Auto upgrade
 - IP address assignment
   * Static IP assignment
   * BOOTP and DHCP for IP address assignment
 - DHCP functions
   * DHCP client
   * DHCP snooping
   * DHCP Option 82 relay agent
   * DHCP snooping Option 82
   * DHCP dynamic provision option 66, 67
 - DNS: Client, Proxy
 - Telnet-Server
 - SNMP v1/v2c/v3
 - RMON
 - Port mirroring
 - VLAN mirroring
 - MAC-based mirroring
Operating Conditions:
 - Operating temperature: 0 to 50°C

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Summary

• 48 RJ45 10/100/1000 ports and
• 4 SFP 1G ports
• Non-blocking connectivity
• Standard Layer 2 Features:
• IPV4 and IPv6, QoS, 256VLANs
• Jumbo Frame Support up to 9KB
• RJ45 Console Port for CLI: Web Management GUI, CLI
• Energy Efficient Ethernet (802.3az)
• Power-over-Ethernet (802.3at)
  - Up to 30W per port / Up to 400W total PoE budget
• Power supply: 500W (87% efficiency)
• 1U form factor for flexible installation
• Dimensions (W x D x H): 440mm x 379mm x 43mm
• Weight: 11.7 lbs / 5.3 kg

Specifications - Features

Switching Features:
 - 16K MAC address entries
 - Auto negotiation on all ports
   * Flow Control supported
   * Provides IEEE 802.3x for full duplex mode
 - 10/100Mbps mode > back pressure flow control half duplex mode
 - Storm protection
   * Broadcast
   * Multicast
 - Spanning tree
   * IEEE 802.1D spanning tree
   * IEEE 802.1s multiple spanning tree (32 instance)
   * IEEE 802.1w rapid spanning tree
   * Spanning Tree fast forwarding
   * Loopback Detection
   * Auto edge port
   * BPDU filter/guard
   * Root Guard
 - VLANs support:
   * IEEE 802.1Q VLAN
   * Port-based VLAN
   * MAC-based VLAN
   * Protocol-based VLAN
      - 16 entries per system
   * IP-based VLAN
   * 4K VLANs
   * Support private VLAN Edge (Traffic Segmentation)
   * Voice VLAN
   * Guest VLAN
   * VLAN Trunking
   * GVRP
   * Supports Multicast VLAN Registration (MVR)*:
     - 5 MVR group
     - 256 MVR source group (shared with IPMC table)
 - Double tagging:
   * IEEE 802.1 Q-in-Q
   * IEEE 802.1ad provider bridge
   * Unqualified learning and forwarding
 - IGMP:
   * IGMP snooping v1/v2/v3
   * IGMP v1/v2 querier
   * IGMP immediate leave
   * IGMP filtering/throttling
   * IGMP snooping leave proxy
   * IGMP v1/v2/v3 proxy
 - Link Aggregation
   * IEEE 802.3ad with LACP
   * Manual trunking
   * Up to 12 aggregation groups are supported, and up to 8 ports per group
Security Features:
 - Port Security (MAC-binding)
   * Static port (MAC-based)
   * Dynamic port (MAC-based)
 - User/Password protected system management interface
   * SNMP
   * Web
   * Telnet
 - Access control list (512 rules)
   * L2/L3/L4
   * IP-MAC ACL
   * Time-based ACL
 - Extended IPv6 ACL
 - RADIUS (RFC2138)
 - TACACS+
 - HTTPS/SSL
 - SSH v1.5/v2.0
Quality of Service (QoS):
 - Provides 4 queues per port
 - Priority queue scheduling scheme
   * Strict priority
   * Deficit weighted round robin
 - IPv4/v6 DiffServ
   * L2/L3/L4 Traffic Classification / Priority Management
   * IEEE 802.1p (COS)
   * DSCP/TOS
   * TCP/UDP port number
   * IP SA/DA
   * MAC SA/DA
   * IPv6
 - Queuing
   * Port based CoS
   * IEEE 802.1p VLAN information based CoS
   * IP ToS/IP precedence based CoS
   * DSCP based CoS
   * TCP/UDP port base CoS
   * QoS marking
 - Packet prioritization based on ingress/egress ports'
    pre-defined value listed below
   * Trusted
   * IEEE 802.1p/Q tag
   * ToS field tag
   * IPv4 DSCP
   * Ethernet type field
   * TCP and/or UDP port numbers
   * SA and/or DA IP address
   * ToS Field Tag
 - Traffic shaping
   * IP based (all ports)
   * Port based (all ports)
   * Port based shaping QoS aware
 - Per port bandwidth management
   * Resolution 64KB
 - Ingress/Egress metering at 64KB increments
   * Ingress/egress policer
   * Ingress and egress co-work
 - CPU interface filtering
Management Features:
 - RJ45-type console interface
 - Management methods:
   * Web-based
   * Telnet (4 session)
   * SNMP
 - Software upgrade/download
 - Multiple configuration file upload / download by TFTP and HTTP
 - Dual image
 - Auto upgrade
 - IP address assignment
   * Static IP assignment
   * BOOTP and DHCP for IP address assignment
 - DHCP functions
   * DHCP client
   * DHCP snooping
   * DHCP Option 82 relay agent
   * DHCP snooping Option 82
   * DHCP dynamic provision option 66, 67
 - DNS: Client, Proxy
 - Telnet-Server
 - SNMP v1/v2c/v3
 - RMON
 - Port mirroring
 - VLAN mirroring
 - MAC-based mirroring

Operating Conditions:
 - Operating temperature: 0 to 50°C

 

Layer 3 Ethernet Switches
Enterprise-Class Performance with Advanced switching capabilities in a 1U form factor. Highly cost-effective 10-Gigabit and 1/10-Gigabit Ethernet Networking – Standalone or Top-of-Rack.

These Layer 3 Ethernet Switches offer aggregation of 24 or 48 ports of 10/100/1000 BASE-T Gigabit Ethernet onto up to four 10-Gigabit Ethernet uplinks. This allows connectivity to 10GE routers, servers, backbones, and data centers. In addition, the 10-Gigabit models provide top-of-rack data-center friendly interconnection for high-speed server and storage systems as well as access to corporate or data center backbone networks.

The 1U form factor gives users the ability to optimize deployment in wiring closet or top-of-rack environments. A comprehensive routing and protocol software suite ensures optimal performance in even the most demanding enterprise-class networking environments. It is ideal for organizations with growing and consolidated data centers. Supermicro Blade server customers will further appreciate the common set of features and a management interface that matches those of the Supermicro 1/10G Layer 3 Ethernet Switch for the Blade.

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Specifications - Features

Switching Features:
 - Link Aggregation - 24 groups w/ 8 members per group
 - LACP Support
 - MLAG Support
 - Link Layer Discovery Protocol (802.1AB)
 - Jumbo Frame Support
 - Port Mirroring - N to 1. Tx & Rx Configurable

Routing Features:
 - Static Routing, RIP v1/v2, RIPng, OSPF v1/v2/v3 & BGP
 - IPv4 and IPv6 Routing
 - VRRP (Virtual Router Redundancy Protocol)
 - DVMRP (Distance Vector Multicast Routing Protocol
Port Attributes:
 - 48 Ten Gigabit Ethernet ports - SFP+ Connectors
 - 4 Forty-Gigabit Ethernet ports - QSFP Connectors
 - 2 One-Gigabit Ethernet ports - RJ45 Connectors
 - Out-of-band RS-232 Management port
Performance:
 - Switching capacity: 1284 Gbps
Availability:
 - Spanning Tree (802.1D)
 - Rapid Spanning Tree (802.1w)
 - Multiple Spanning Trees (802.1s)
 - Virtual Redundant Routing Protocol (VRRP)
VLAN:
 - 802.1Q tagging, port and protocol based
 - 4K VLANs
 - Dynamic VLAN Support (GVRP) Quality of Service and DiffServ:
 - 8 priority queues per port
 - Adjusted WRR and Strict Priority Scheduling
 - Layer 2 / 3 / 4 Prioritization
 - Marking
 - Metering / Rate limiting
Multicast:
 - IGMP Snooping v1/ v2/ v3
 - IGMP v1/ v2/ v3
 - PIM SM, PIM DM
 - PIM SMv6
Security:
 - 802.1x Port Based Authentication
 - Switch access password protection
 - Layer 2 / 3 / 4 Access control Lists
 - RADIUS and TACACS+ Authentication
 - SSH / SSL Encryption
Management:
 - Web-based management interface
     - HTTP, HTTPS
     - Telnet (4 sessions)
 - Industry standard CLI with telnet, SSH or local management port
         - Scripting capability
        - Command completion
        - Context sensitive "Help"
 - Multiple levels of user privileges (CLI and Web UI)
 - SNMP v1/v2/v3
 - Four RMON Groups - (1, 2, 3 and 9)
 - Logging - syslog
 - Dual firmware images
 - Configuration file - upload / download
Dimensions:
 - 17.3" W x 18.6" D x 1.7" H (440mm W x 473mm D x 43mm H)
Weight:
 - 18.1 lbs / 8.18 kg
Power:
 - Dual 400W Hot-swap Redundant Power Supplies
 - Power Consumption of 326W
Operating Temperature:
 - 0°C to 40°C

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Specifications - Features

Switching Features:
 - Link Aggregation - 24 groups with 8 members per group
 - LACP Support
 - MLAG Support
 - Link Layer Discovery Protocol (802.1AB)
 - Jumbo Frame Support
 - Port Mirroring - N to 1. Tx & Rx Configurable

Routing Features:
 - Static Routing, RIP v1/v2, RIPng, OSPF v1/v2/v3 & BGP
 - IPv4 and IPv6 Routing
 - VRRP (Virtual Router Redundancy Protocol)
 - DVMRP (Distance Vector Multicast Routing Protocol)

Port Attributes:
 - 24 Ten Gigabit Ethernet ports - SFP+ Connectors
 - Out-of-band RS-232 Management port

Performance:
 - Switching capacity: 480 Gbps

Availability:
 - Spanning Tree (802.1D)
 - Rapid Spanning Tree (802.1w)
 - Multiple Spanning Trees (802.1s)
 - Virtual Redundant Routing Protocol (VRRP)

VLAN:
 - 802.1Q tagging, port and protocol based
 - 4K VLANs
 - Dynamic VLAN Support (GVRP)

Quality of Service and DiffServ:
 - 8 priority queues per port
 - Adjusted WRR and Strict Priority Scheduling
 - Layer 2 / 3 / 4 Prioritization
 - Marking
 - Metering / Rate limiting

Multicast:
 - IGMP Snooping v1/ v2/ v3
 - IGMP v1/ v2/ v3
 - PIM SM, PIM DM
 - PIM SMv6

Security:
 - 802.1x Port Based Authentication
 - Switch access password protection
 - Layer 2 / 3 / 4 Access control Lists
 - RADIUS and TACACS+ Authentication
 - SSH / SSL Encryption

Management:
 - Web-based management interface
     - HTTP, HTTPS
 - Industry standard CLI with telnet, SSH orlocal management port
     - Scripting capability
     - Command completion
     - Context sensitive "Help"
 - Multiple levels of user privileges (CLI and Web UI)
 - SNMP v1/v2/v3
 - Four RMON Groups - (1, 2, 3 and 9)
 - Logging - syslog
 - Dual firmware images
 - Configuration file - upload / download

Dimensions:
 - 17.3" W x 15.2" D x 1.7" H (440mm W x 386mm D x 43mm H)

Weight:
 - 16.7 lbs / 7.58 kg

Power:
 - Dual 300W Hot-swap Redundant Power Supplies
 - Power Consumption of 176W

Operating Temperature:
 - 0° to 40°

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Specifications - Features

Port Attributes:
 - 24 one Gigabit Ethernet ports
      * 24 RJ45 Copper ports
      * Four fiber SFP combo ports
      * Two or four 10 Gigabit Ethernet uplink ports(requires Add-On-Module(s) for choice of connector
        type – see "Optional Accessories" below)
      * Up to two stacking ports (requires AOM-SSE-X2C accessory)
 - Out-of-band RS-232 Management port
Performance:
 - Switching capacity: 136 Gbps
 - Stacking performance - up to 48 Gbps
 - Forwarding rate: 95 Mpps
Availability:
 - Spanning Tree (802.1D)
 - Rapid Spanning Tree (802.1w)
 - Multiple Spanning Trees (802.1s)
 - Virtual Redundant Routing Protocol (VRRP)
VLAN:
 - 802.1Q tagging, port and protocol based
 - 1024 VLANs
 - Dynamic VLAN Support (GVRP)
Quality of Service and DiffServ:
 - 8 priority queues per port
 - Adjusted WRR and Strict Priority Scheduling
 - Layer 2 / 3 / 4 Prioritization
 - Marking
 - Metering / Rate limiting
Switching Features:
 - Link Aggregation - 24 groups w/ 8 members per group
 - LACP Support
 - Link Layer Discovery Protocol (802.1AB)
 - Jumbo Frame Support
 - Port Mirroring - N to 1. Tx & Rx Configurable
Routing Features:
 - Static Routing, RIP v1/v2, RIPng, OSPF v1/v2/v3, BGP
 - IPv4 and IPv6 Routing
 - VRRP (Virtual Router Redundancy Protocol)
 - DVMRP (Distance Vector Multicast Routing Protocol)
Multicast:
 - IGMP Snooping v1/v2/v3
 - IGMP v1/v2/v3
 - PIM SM, PIM DM
 - PIM SMv6
Security:
 - 802.1x Port Based Authentication
 - Switch access password protection
 - Layer 2 / 3 / 4 Access control Lists
 - RADIUS and TACACS+ Authentication
 - SSH / SSL Encryption
Management:
 - Web-basd management interface - HTTP, HTTPS
 - Industry standard CLI with telnet, SSH or local management port
 - Scripting capability
 - Command completion
 - Context sensitive "Help"
 - Multiple levels of user privileges (CLI and Web UI)
 - SNMP v1/v2/v3
 - Four RMON Groups - (1, 2, 3 and 9)
 - Logging - syslog
 - Dual firmware images
 - Configuration file - upload / download
Options:
 - AOM-SSE-X2C: Two-port CX4 Connector Module for copper connections
 - AOM-SSE-X2F: Two-port XFP Connector Module for Fiber connections
 - AOM-SSE-X2S: Two-port SFP+ Connector Module for Copper or Fiber connections
Operating Conditions:
 - Operating temperature: 0 to 40°C
 - Power Consumption: 105 W

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Specifications - Features

Port Attributes:
 - 48 one Gigabit Ethernet ports
      * 48 RJ45 Copper ports
      * Four fiber SFP combo ports
      * Two or four 10 Gigabit Ethernet uplink ports(requires Add-On-Module(s) for choice of connector
        type – see "Optional Accessories" below)
      * Up to two stacking ports(requires AOM-SSE-X2C accessory)
 - Out-of-band RS-232 Management port
Performance:
 - Switching capacity: 184 Gbps
 - Stacking performance - up to 48 Gbps
 - Forwarding rate: 131 Mpps
Availability:
 - Spanning Tree (802.1D)
 - Rapid Spanning Tree (802.1w)
 - Multiple Spanning Trees (802.1s)
 - Virtual Redundant Routing Protocol (VRRP)
VLAN:

 - 802.1Q tagging, port and protocol based
 - 1024 VLANs
 - Dynamic VLAN Support (GVRP)
Quality of Service and DiffServ:
 - 8 priority queues per port
 - Adjusted WRR and Strict Priority Scheduling
 - Layer 2 / 3 / 4 Prioritization
 - Marking
 - Metering / Rate limiting
Switching Features:
 - Link Aggregation - 24 groups w/ 8 members per group
 - LACP Support
 - Link Layer Discovery Protocol (802.1AB)
 - Jumbo Frame Support
 - Port Mirroring - N to 1. Tx & Rx Configurable
Routing Features:
 - Static Routing, RIP v1/v2, RIPng, OSPF v1/v2/v3, BGP
 - IPv4 and IPv6 Routing
 - VRRP (Virtual Router Redundancy Protocol)
 - DVMRP (Distance Vector Multicast Routing Protocol)
Multicast:
 - IGMP Snooping v1/v2/v3
 - IGMP v1/v2/v3
 - PIM SM, PIM DM
 - PIM SMv6
Security:
 - 802.1x Port Based Authentication
 - Switch access password protection
 - Layer 2 / 3 / 4 Access control Lists
 - RADIUS and TACACS+ Authentication
 - SSH / SSL Encryption
Management:
 - Web-basd management interface - HTTP, HTTPS
 - Industry standard CLI with telnet, SSH or local management port
 - Scripting capability
 - Command completion
 - Context sensitive "Help"
 - Multiple levels of user privileges (CLI and Web UI)
 - SNMP v1/v2/v3
 - Four RMON Groups - (1, 2, 3 and 9)
 - Logging - syslog
 - Dual firmware images
 - Configuration file - upload / download
Options:
 - AOM-SSE-X2C: Two-port CX4 Connector Module for copper connections
 - AOM-SSE-X2F: Two-port XFP Connector Module for Fiber connections
 - AOM-SSE-X2S: Two-port SFP+ Connector Module for Copper or Fiber connections
Operating Conditions:
 - Operating temperature: 0 to 40°C
 - Power Consumption: 145 W

Network Adapters With outstanding performance, high power efficiency and excellent value, Supermicro’s network adapters can help improve network throughput and application performance through features that maximize bandwidth and offload CPU resources. From 10Gb Ethernet to InfiniBand technologies, dual-port and quad-port connectivity, in UIO (Universal I/O) and standard form factors, Supermicro’s network adapters are optimized for the most demanding multi-core computing systems.

Adapter SKUs
Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Key Features

• Single QSFP Connector

• Low-profile UIO Form Factor

• PCI Express 3.0 (up to 8GT/s)

• Virtual Protocol Interconnect (VPI)

• 1µs MPI ping latency • Up to 56Gbps InfiniBand or 40Gbps Ethernet

• CPU offload of transport operations

• Application offload • GPU communication acceleration

• End-to-end QoS and congestion control

• Hardware-based I/O virtualization

• Ethernet encapsulation (EoIB) • RoHS compliant 6/6

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Specification

 

• General

   - Intel® 82599ES 10GbE controller
   - Compact size microLP form factor
   - Dual SFP+ and dual USB 2.0 ports
   - PCI-E x8 2.0 (5GT/s)
   - Load balancing on multiple CPUs
   - iSCSI remote boot support
   - Fibre Channel over Ethernet (FCoE) Support
   - Intel® PROSet Utility for Windows® Device Manager

• I/O Features

   - Intel® QuickData Technology: DMA engine that enhances data acceleration and lowers CPU usage
   - Direct Cache Access (DCA) to avoid cache misses
   - MSI-X support to minimize the overhead of interrupts allowing load-balancing between multiple cores/CPUs
   - Tx/Rx IP, SCTP, TCP and UDP checksum offloading capabilities(IPv4, IPv6)
   - Receive and Transmit Side Scaling for Windows environments and Scalable I/O for Linux environments

• Virtualization Features

   - Supports virtualization features such as VMDq, Next-gen. VMDq (64 queues per port) and PC-SIG SR-IOV implementation
   - IPv6 Offloading
   - Advanced Packet Filtering
   - VLAN support to allow creation of multiple VLAN segments
   - VXLAN through Software



• Manageability Features

   - Preboot eXecution Environment (PXE) support
   - Simple Network Management Protocol (SNMP) and Remote
   - Network Monitoring (RMON) statistics counters
   - iSCSI remote boot

• OS Support

   - Windows® 7, 8, Server 2003, Server 2008, Server 2008 R2, Server 2012, Vista
   - RedHat EL, SuSe SLES
   - FreeBSD

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Specification


• General
   - Intel® 82599EN 10GbE controller
   - Compact size microLP form factor
   - Single SFP+ port and dual USB 2.0 ports
   - PCI-E x8 2.0 (5GT/s)
   - Load balancing on multiple CPUs
   - iSCSI remote boot support
   - Fibre Channel over Ethernet (FCoE) Support
   - Intel® PROSet Utility for Windows® Device Manager

• I/O Features

   - Intel QuickData Technology: DMA engine that enhances
   - Data acceleration and lowers CPU usage
   - Direct Cache Access (DCA) to avoid cache misses
   - MSI-X support to minimize the overhead of interrupts
   - Allowing load-balancing between multiple cores/CPUs
   - Tx/Rx IP, SCTP, TCP and UDP checksum offloading
     Capabilities (IPv4, IPv6)
   - Receive and Transmit Side Scaling for Window
   - environments and Scalable I/O for Linux environments

• Virtualization Features

   - Supports virtualization features such as VMDq,
   - Next-generation VMDq (64 queues per port) and
   - PC-SIG SR-IOV implementation
   - IPv6 Offloading
   - Advanced Packet Filtering
   - VLAN support to allow creation of multiple VLAN segments
   - VXLAN through Software

• Manageability Features

   - Preboot eXecution Environment (PXE) support
   - Simple Network Management Protocol (SNMP) and Remote
   - Network Monitoring (RMON) statistics counters
   - iSCSI remote boot

• OS Support
   - Windows® 7, 2003, 2008, 2008 R2, Vista
   - RedHat EL, SuSe SLES
   - FreeBSD
   - VMWare

   
     

 

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

 

Specifications:

 

  • Intel i350 dual-port Gigabit Ethernet controller
  • Dual RJ45 connectors
  • PCI-e x4
  • Low-profile standard form factor
  • Intel I/O AT to improve CPU utilization
  • MSI-X support to minimize the overhead of interrupts and allow load balancing of interrupt handling between different CPUs/cores
  • Low-latency interrups
  • Support caches up to 64 packets descriptors per queue
  • Support for transmission and reception of packets up to 9.5KBs (Jumbo Frames)
  • IEEE 802.3 auto-negotiation

IEEE 802.3 compliant flow-control support
VMDq for virtualized environments
Direct Cache Access (DCA) Tx/Rx IP, TCP, and UDP checksum offloading (IPv4, IPV6) capabilities
Tx TCP segmentation offloading (IPv4, IPv6)
Wake on LAN (WOL) support iSCSI boot
Supported cable length is more than 100 meters
Supported OS:
Windows, Linux, VMWare, FreeBSD, Netware

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Key Features
• Hot-pluggable SFP+ footprint
• Supports rate selectable 1.25Gb/s or 9.95 to 10.3Gb/s bit rates
• Power dissipation
• RoHS 6/6 compliant (lead free)
• Commercial temperature range 0°C to 70°C
• Single 3.3 Vdc power supply
• Max. link length 300m on 2000MHz-km MMF
• Ucooled 850nm VCSEL laser
• Receiver limiting electrical interface
• Duplex LC connector
• Built-in digital diagnostic functions

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Key Features

• Virtual Protocol Interconnect™ (VPI)

• 1us MPI ping latency • Selectable 40Gb/s InfiniBand or 10GbE port

• PCI Express 2.0 (up to 5GT/s)

• CPU offload of transport operations

• End-to-end QoS and congestion control

• Hardware-based I/O virtualization •

 TCP/UDP/IP stateless offload

• Fibre Channel encapsulation (FCoIB or FCoE)

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Key Features

• Virtual Protocol Interconnect™ (VPI)

• 1µs MPI ping latency

• Selectable 40Gb/s InfiniBand or 10GbE port

• PCI Express 2.0 (up to 5GT/s)

• CPU offload of transport operations

• End-to-end QoS and congestion control

• Hardware-based I/O virtualization

• TCP/UDP/IP stateless offload

• Fibre Channel encapsulation (FCoIB or FCoE)

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Key Features

• Super I/O Module (SIOM) Form Factor

• Intel® i350 GbE controller

• Dual RJ45 Ports

• VMDq and SR-IOV for Virtualized Environments

• Jumbo Frames support

• Energy Efficient Ethernet (EEE)

• iSCSI Remote Boot Support

• PXE Boot Support

• Support for most Network Operating Systems

• Asset Management Features

• NC-SI for Remote Management

• RoHS compliant 6/6

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Key Features

• Quad SFP+ Connectors

• Super I/O Module (SIOM) Form Factor

• Network Virtualization Offloads including VXLAN and NVGRE

• Small Packet Performance

• Data Plane Developer Kit for efficient packet processing

• Low Power Consumption

• Intel® Flow Director

• Intelligent Offloads

• Unified networking providing a single wire support for LAN and

  storage

• Asset Management Features

• NC-SI for Remote Management

• RoHS compliant 6/6

• Supports Both Direct Attach Copper and Fiber Cables

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Key Features
  • Dual RJ45 Connectors
  • Low Profile, Short Length Standard Form Factor
  • PCI-E 3.0 x8 interface
  • Asset Management Features with thermal sensor
  • Broadcom Dual-Port 10Gbps PCI Express Ethernet Controller
  • Pass-through Energy Efficient Ethernet

    (IEEE STD 802.3az-2010)
  • TruFlow
  • NPAR (NIC Partitioning)
  • VXLAN, NVGRE and Geneve
  • Low latency RDMA over Converged Ethernet (RoCE)
  • SR-iOV, VMQueue, NetQueue, Multiqueue
  • Jumbo Frames (up to 9600-byte)

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Key Features

• Dual SFP28 Connectors
• Low-Profile, Short Length Standard Form Factor
• PCI-E 3.0 x8 interface
• Asset Management Features with thermal sensor
• Broadcom Dual-Port 25 Gbps PCI Express Gen3       EthernetController
• Energy Efficient Ethernet (EEE)
• Data Center Bridging (DCB)
• IEEE1588 Time Sync
• TruFlow
• NPAR
• VXLAN and NVGRE
• RDMA over Converged Ethernet (RoCE)
• NetQueue, VMQueue, and Multiqueue
• PCI-SIG SR-IOV compliant
• Jumbo Frames support up to 9600-Byte
• NC-SI for IPMI support
• RoHS compliant 6/6

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

 

Key Features 

  • Standard Low-profile QLogic 8Gb Fibre Channel card with 2x SFP+ ports
  • Interface: PCI-E 2.0 x8
  • Port: 2 SFP+ ports
  • Speed: 8Gbps per port

Layer 2 Ethernet Switch - SSE-G2252P w/ Power-over-Ethernet

Main Specifications
Dimensions (WxDxH) Card PCB dimensions: 9.91cm (3.90in) x 6.35cm (2.50in) (L x H)
Form Factor Low-profile
Interface (Bus) Type PCI-E 2.1 x4 (2.5GT/s or 5GT/s) interface
Device Type Ethernet Adapter Card
Miscellaneous
Features 4 RJ45 (1Gb/port)
Compliant Standards RoHS Compliant 6/6
Note Height of end brackets: standard – 12cm (4.725in), low-profile – 7.94cm (3.13in)
Cables Required RJ-45 Category-5/5e up to 100m
Power
Consumption Low Power Consumption (5W Typical)
Software / System Requirements
OS Required Windows XP SP3, Vista SP2, 7 SP1 2003 SP2, 2008 SP2, 2008 R2S, RedHat EL 5.5, 6.0; SuSe SLES 10 SP3, 11 SP1, FreeBSD 8.0, VMware ESX 4.0, 4.1, 5.0, Xen
Minimum System Requirements Motherboards with minimum PCI-E x4 slot
  Server Systems with low-profile or full-height PCI-E x8 expansion slot

Recent Videos

WatchGuard Network Security
The next generation PAM
Sophos: Cybersecurity Evolved
Supermicro Contributes to the MN-3 Supercomputer Earning #1 on Green500 list
Telcobridges Speaks about their media gateway hardware
Arbor Networks ATLAS
Arbor Networks NSI
Arbor Networks TMS
Arbor Cloud
Arbor Network APS